3. This is required if this is the first module in an append chain.
4. This is required unless this is the last module in an append chain.
5. CRC_ON or CRC_OFF must correspond to the setting of the
module supplying the data to the fiber interface.
6. This is required for all modules in an append chain.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
page
102.
See Also
"Default values" on page
201,
page 102
Agilent E1439 Programmer's Reference
"age1439_init" on page
132,
Functions listed alphabetically
"age1439_error_message" on
"age1439_error_message" on
101