Agilent Technologies E1439 User Manual page 181

Note
The required completion time for self-test is up to 25 seconds depending on the amount of
memory in the module.
Note
Calling this function halts any measurement or fiber transfer.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
page
See Also
"Commands which halt active measurements" on page
Error
Message
AGE1439_ST_ANALOG_FAIL
AGE1439_ST_FIBER_FAIL
AGE1439_ST_EXECUTION_ERR
102.
Agilent E1439 Programmer's Reference
Functions listed alphabetically
Error Code Self Test
(hex) Status Message
0x100 analog test failed
0x200 fiber test failed
0x4000 self-test execution error
"age1439_error_message" on
198, "age1439_init" on page 132
171