Agilent Technologies E1439 User Manual page 171

call to age1439_meas_init, age1439_meas_init, or age1439_read, whichever was issued last.
You should be aware that it is likely that the reported overload occurred in data which has been
acquired in the module, is waiting in the FIFO, but has not yet been read.
Return Value
AGE1439_SUCCESS
AGE1439_NO_DATA_MEASUREMENT_IN_PROGRESS
AGE1439_NO_DATA_MEASUREMENT_PAUSED
AGE1439_NO_DATA_WAITING_FOR_TRIGGER
AGE1439_NO_DATA_WAITING_FOR_ARM
See Also
"age1439_init" on page 132,
page 155, "age1439_meas_init" on page
status_get" on page 176, "The measurement loop" in chapter 3
Agilent E1439 Programmer's Reference
"age1439_data_setup" on page
154, "age1439_meas_control" on page
Functions listed alphabetically
90, "age1439_meas_start" on
151, "age1439_
161