Selecting Layouts And Input Sources - Planar UltraRes P Series User Manual

16.10 Selecting Layouts and Input Sources

With Planar MediaPlex Plus Processing, you can show one source at a time or multiple sources
simultaneously. Multiple layout options are available and can be selected from the Inputs and
Views Menu (see page 40). Once a layout has been designated, you can assign sources to
each of the zones in the layout. The selection of sources must be made one at a time by
assigning a current zone. To select the current zone, you can navigate through the on-screen
menu (see page 40). Alternatively, you can use the remote or keypad as described next.
Remote
Press the Zone 1, Zone 2, Zone 3, or Zone 4 buttons on the remote. After selecting the desired
zone, you can press the source button (DP, HDMI 1, HDMI 2, HDMI 3, or HDMI 4). This action
will also select the active audio source.
For example, to change Zone 3 to DP, press the Zone 3 button and then press the DP button.
Keypad
Press the SRC/Source button. The input source will be toggled sequentially.
Note: Sources will toggle through the current zone, or last zone to be modified. Current zones
can only be re-assigned in the on-screen menu.
Note: This feature requires the IR remote part # 952-0086-00. This remote ships standard with
the 75" and 85". To use this feature on the URP49 / URP55 / URP65, the remote must be
ordered by contacting Planar.
Planar UltraRes P Series User Manual
020-1407-01B
38
Page | 38