Table of Contents
Advertisement
URP75 / URP85
Command
Image View On
Text View On
Standby
Routing Change
Active Source
Give Physical Address
Report Physical Address
Request Active Source
Set Stream Path
Give Device Power Status
Report Power Status
Inactive Source
CEC Version
Get CEC Version
Give Features
Report Features
DisplayPort Type
•
Set the version of DisplayPort that is used by the system
•
Options: 1.1, 1.2; Default: 1.2
Keypad Lock
•
Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.
•
Options: Enable, Disable; Default: Disable
IR Remote Lock
•
Lock or unlock the remote control. When it is enabled, all remote control presses will be
ignored.
•
Options: Enable, Disable; Default: Disable
IR Remote ID Code (URP75 / URP85 only)
•
Selects the IR remote code set accepted by the display.
•
Note: The remote that ships with the URP49 / URP55 / URP65 (952-0088-00) only
supports the default IR code of 01785. Changing the default IR code requires the use of
the 952-0086-00 Planar remote. See "Using the Remote Control" on page 29.
•
Options: 00000-65535; Default: 01785
Planar UltraRes P Series User Manual
020-1407-01B
69
Value
0x04
0x0D
0x36
0x80
0x82
0x83
0x84
0x85
0x86
0x8F
0x90
0x9D
0x9E
0x9F
0xA5
0xA6
Page | 69
Advertisement
Table of Contents
