Installation - Graco G3 Series Instructions Manual

Installation

Grounding
The equipment must be grounded. Grounding reduces the risk of electric shock by providing an escape wire for the
electrical current in the event of malfunction or breakdown. This product is equipped with a cord having an equipment
grounding conductor. The wire with insulation having an outer surface that is green with or without yellow stripes is
the grounding wire.
Component Identification
96GXXX
G3-G-24NC-2L0A00-L0C00000
C
J
I
K
F . 2:
IG
Key:
A Reservoir
B Adjustable Pump Element (1 included. Can accommodate
3 total)
C Pressure Relief Valve (Not included / required for each
outlet - Available from Graco. See Parts, page 53.)
D Zerk Inlet Fill Fitting (1 included)
E Pump Outlet Plug (2 included)
F Volume Control Spacers (2 included. More spacers = less
output volume per stroke) (also see F
3A0414B
A
. 4, page 25)
IG
M
Models with Follower Plate View
H
F
B
G Fuse (DC models only - Not included, not shown.
Available from Graco. See Parts, page 54.)
H Control Panel (Pro and Max models only)
I Power / Sensor Panel (both sides; only one side shown)
J Part Number / Model Number example only shown, (see
pages 3 and 4, Understanding the Model Number, for
details)
K Power Cord (DIN shown)
L Follower Plate (not included on all models)
M Vent Hole for Follower Plate (not on all models)
Installation
E
D
L
7