Resetting The Pb21/Pb31; Upgrading The Firmware - Intermec PB21 User Manual

Chapter 3 — Troubleshooting and Maintaining the PB21/PB31

Resetting the PB21/PB31

Upgrading the Firmware

48
You rarely need to reset the PB21/PB31 printer, unless you are
upgrading the firmware. If your printer occasionally locks up, you will
want to reset it. A reset reinitializes the 802.11 radio and clears the
working memory.
Note: The Setup menu is not affected by a reset. Your printer retains
all of your configuration settings after the printer powers back up.
To reset the PB21/PB31
1 Disconnect the PB21/PB31 from power if externally powered.
2 Remove the battery from the PB21/PB31 for at least one second.
3 Insert the battery back into the PB21/PB31.
4 Reconnect external power if your PB21/PB31 is externally
powered.
The latest firmware and software is always available for download
from the Intermec web site at www.intermec.com.
To download firmware updates
1 Go to the Intermec web site at www.intermec.com.
2 Click Products > Printers and Media > Mobile Printers.
3 Choose a PB21 or PB31 mobile printer.
4 Click the Downloads tab to download the latest firmware version
to your computer.
Note: All of the printer languages are integrated in a single
firmware version.
5 Extract the .zip file to a folder on your computer.
PB21/PB31 Mobile Receipt Printer User's Guide