Charging The Batteries; Understanding The Battery Icons - Intermec PB21 User Manual

Charging the Batteries

Understanding the Battery Icons

PB21/PB31 Mobile Receipt Printer User's Guide
There are two ways to charge the PB21/PB31 battery:
• Connect AC power to the printer using a 12 VDC power supply
and charge the battery while it is in the PB21/PB31.
• Charge the battery in the AC18 4-bay battery charger. It takes
approximately 4 hours to charge your batteries using the 4-bay
battery charger.
For information on charging your battery in the 4-bay battery
charger, see the AC18 4-Bay Battery Charger
It takes approximately 3 hours to charge the battery while it is
installed in the PB21/PB31 printer. To charge the battery inside the
PB21/PB31, you need:
• an Intermec 12 VDC power supply (Model AE19).
an AC power cord.
•
To charge the battery inside the PB21/PB31
1 Install the battery in the PB21/PB31. For help, see the previous
section, "Installing the Battery" on page
2 Connect the power supply to the DC power connector on the
printer.
3 Connect one end of the power cord to the power supply and then
plug the other end into an AC outlet.
The easiest way to tell the status of your battery is to look at the
battery icons on the control panel of the PB21/PB31.
Battery Icon Status
Icon Status
Battery is fully charged.
Battery has a medium charge. You should be able to work for
several more hours before charging or replacing the battery.
Battery is low. Recharge the battery.
Chapter 1 — Using the PB21/PB31 Mobile Receipt Printer
Instructions.
7.
9