Understanding The Control Panel - Intermec PB21 User Manual

Understanding the Control Panel

PB21/PB31 Mobile Receipt Printer User's Guide
The PB21/PB31 control panel contains four buttons, a liquid crystal
display (LCD), and one LED indicator. Use the four buttons to
navigate the menu system and perform functions on the PB21/PB31
printer. See the following tables to understand the buttons, the menu
system, and what the LED means.
Feed button
Standby button
Printer Control Panel
Understanding How to Use the PB21/PB31 Buttons
Button
Name Button
Feed
Setup
Standby
(Power)
Chapter 1 — Using the PB21/PB31 Mobile Receipt Printer
SETUP:
SER-COM
OK
Function
Press to advance the media. The amount of media that
feeds is dependent on the type of media you are using.
It will advance by 5 mm (0.2 inch), or feed a configured
length of media based on your media and settings.
If the printer is printing, pressing this button causes
the printer to pause. Press the button again to resume
printing.
Press to display the Setup menu. With ESC/P firmware,
press and hold to cancel printing.
Press to put the printer in Standby mode. In Standby
mode, power to the radio, the display, and the
backlight are turned off.
Press to turn the printer back on and put in Ready
mode.
Ready-to-Work
indicator
Setup button
Info button
3