Changing The Printer Language - Intermec PB21 User Manual

Changing the Printer Language

PB21/PB31 Mobile Receipt Printer User's Guide
The following printer languages are available on the PB21 and PB31
printers:
• Fingerprint
• IPL
• ESC/P
• DSim
• ZSim
The most frequently used methods of changing languages are by
using HyperTerminal and through the display settings. These
methods are described below.
To change the printer language using the display settings
• Press the Setup button to the change command language
function. See Appendix C
To change the printer language using Fingerprint and HyperTerminal
1 Select Start > Accessories> Communications > Hyperterminal
to start HyperTerminal.
2 Send the enable administrator rights command:
run "su -p pass admin
3 Send the run command to change the printer language to IPL:
setlanguage IPL -r
To change the printer language using IPL and HyperTerminal
1 Select Start > Accessories> Communications > Hyperterminal
to start HyperTerminal.
2 Send the enable administrator rights command:
<STX><ESC>.y, su -p pass admin <ETX>
3 Send the run command to change the printer language:
<STX><EXC> .y,setlanguage FP -r<ETX>
To change the printer language using ESC/P and HyperTerminal
1 Select Start > Accessories> Communications > Hyperterminal
to start HyperTerminal.
Chapter 2 — Configuring the PB21/PB31
for the Fingerprint and IPL menu trees.
27