Setting Up Print Queues And Advanced Operating Parameters - Intermec ColorCoder 901 Installation Manual

2. Connect the Ethernet adapter to the NetWare network, if it is not
already connected.
3. Use the NetWare Administrator to create an NDPS printer as an
object in the directory.
As a directory object, access to the NDPS printer is controlled. It is not
available as a public access printer.
To install an Ethernet adapter in a NetWare network using
AXIS NetPilot
Note: AXIS NetPilot software requires a Windows platform that uses
NetWare or NetBIOS/NetBEUI.
1. Load the AXIS NetPilot software. For help, see the Intermec
Ethernet Adapter User's Manual.
2. After loading the software, double-click on the AXIS NetPilot icon.
AXIS NetPilot then scans the network for all connected Ethernet
adapters. Ethernet adapters previously installed using the AXIS
NetPilot appear as Network Print Servers and uninstalled units are
listed as New Axis Units.
3. Select your Ethernet adapter from the New Axis Units sub-folder
and then click the Install icon. The Installation Wizard guides you
through the basic installation.
Click the Help icon if you need help during the installation procedure.
After AXIS NetPilot finishes configuring the Ethernet adapter, wait
about one minute before trying to communicate with the Ethernet
adapter.
Setting Up Print Queues and Advanced Operating
Parameters
To set up print queues
1. Open the Network Print Servers folder and then select the network
print server you want to set up.
13