Maintenance Instructions; Operating Instructions - Intermec CN3 Instructions Manual

MAINTENANCE INSTRUCTIONS

Disconnect before cleaning. Do not immerse. Do not
disassemble. All other servicing should be performed by
qualified service personnel.

OPERATING INSTRUCTIONS

This device allows you to power and charge your CN3 with
your vehicle battery. However, before using the CN3 Vehicle
Adapter, make sure that the unit is installed as shown on
page 5 before use.
Note: The CN3 Vehicle Adapter uses an internally
resettable fuse.
Risk of fire. Do not replace any vehicle fuse with
a rating higher than recommended by the
vehicle manufacturer. This product is rated to
draw a maximum of 3.5 amperes from a 12 to 24
V vehicle outlet. Ensure that the electrical
system in your vehicle can supply this product
without causing the vehicle fusing to open. This
can be determined by making sure the fuse in
the vehicle which protects the outlet is rated
higher than 3.5 amperes. Information on the
vehicle fuse ratings is typically found in the
vehicle operator's manual.