Table of Contents
Advertisement
To install peer-to-peer printing
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add.
3. In the NPS Port list, select the Ethernet adapter port to be installed.
The port appears as name.LP1, where name is AX followed by the
last six digits of the Ethernet adapter's serial number, for example,
AX540B35.LP1. You can change this name using AXIS NetPilot.
4. Accept or change the suggested Windows port name, and type any
comments in the Description field. Make a note of the Windows
port name as you will need it later.
5. Click OK to install the Windows port.
6. In the Port menu, click Connect to display the Windows Printers
dialog.
7. Select a printer driver from the list of Installed Printers, or click
Add to install a new driver. Click Connect.
8. Select the Windows port name defined in Step 4 that should now be
listed at the bottom of the Ports list.
9. Click OK to close the Connect dialog and Close to close Printers.
The setup is completed and you can now print through your Ethernet
adapter.
To install client/server printing
Note: Only install client/server printing on a Windows for Workgroups
workstation.
1. Install AXIS Print Utility for Windows onto the file server.
2. Set up your Ethernet adapter from the file server as described in the
peer-to-peer printing section earlier in this guide, but check the
Share box for your printer.
All the Windows clients can now use your shared printers, and you do
not need to install the AXIS Print Utility on the clients.
18
Advertisement
Table of Contents
