Setting Up To Print; Printing Through Ftp; Printing From A Windows Nt 4 Pc Or Windows 2000/Xp Pc - Intermec EasyLAN 10i2 User Manual

EasyLAN 10i2 Ethernet Adapter User's Manual

Setting Up to Print

After you have connected the EasyLAN 10i2 and printer to your network and assigned
the EasyLAN 10i2 adapter an IP address, you are ready to set up your printer to print.
This section explains
•
•
•
To set up your printer to print from a UNIX system, see "Configuring for UNIX" in
Chapter 2.

Printing Through FTP

After you install the EasyLAN 10i2 adapter in your network, you are ready to print
through it. This section explains how to use FTP to print to your printer.
To print using an FTP session
1. From an MS DOS prompt, login to the EasyLAN 10i2 adapter using the command
2. Press Enter. You do not need to enter a specific user id and password.
3. Enter the following command to print the test label:
4. Log out using the command

Printing From a Windows NT 4 PC or Windows 2000/XP PC

This section explains how to set up your printer to print from a Windows NT 4 PC or
Windows 2000/XP PC.
1-10
how to print through FTP.
how to set up printing on a Windows NT 4 PC or Windows 2000/XP PC.
how to install and use the Intermec print monitor on a Windows 95/98 PC.
, where ipaddress is the IP address or name assigned to your
ftp ipaddress
EasyLAN 10i2 adapter. The default name is
the last six digits of the MAC address.
put c :\ path \ file_name p1
where:
c: is the drive where the file you want to print is.
path is the directory that the file is in.
file_name is the name of the file you want to print.
p1 is the name of the port you want to print to.
INTERMEC_ nnnnnn
, , or depending on your FTP version.
quit bye exit
where nnnnnn is