Table of Contents
Advertisement
3. With the AXIS Print Utility running, install your Ethernet adapter
by clicking Install. The port appears as name.LP1, where name is
AX followed by the last six digits of the Ethernet adapter's serial
number, for example AX540B35.LP1. You can change this name
using AXIS NetPilot.
4. Select the ports you want to install, then click Install
5. Repeat this procedure for each server using the Ethernet adapter.
To create a Print Queue (OS/2 version 1.X)
1. Double-click the Print Manager icon, click Setup, then select
Printers.
2. Click Add to make a new printer definition, then type a name of
your choice in the Name field.
3. Select \PIPE\name.LP1 from the Device list, then select a printer
driver suitable for your printer.
4. Click Add then click OK to confirm the printer definition.
5. Click Setup then select Queues.
6. Click Add to create a print queue and type a name in the Name
field.
7. Click Add then click OK to confirm the queue definition.
To create a Print Queue (OS/2 version 2.X and above)
1. Double-click the Templates folder, then drag the Printer icon to the
Workplace Shell (or into a folder) while pressing the mouse button
down.
2. Type a name of your choice in the Name field.
3. Select \PIPE\name.LP1 from the Port list, and select a printer driver
suitable for your printer from the Standard Printer list.
4. Click OK to confirm the printer definition.
20
.
Advertisement
Table of Contents
