Table of Contents
Advertisement
4. Perform the following commands to download the IP address and
verify correct Internet communication:
arp -s host_name node_address temp
ping host_name
where:
host_name
is the name assigned to your Ethernet adapter.
node_address
is the serial number of the Ethernet adapter.
Example:
arp -s salesdept 00:40:8c:10:00:86 temp
ping salesdept
5. Log in to the Ethernet adapter and upload the axinstall script.
Example:
>ftp salesdept
Name (salesdept:thomas): root
Password: pass
ftp> get axinstall
ftp> bye
6. Execute the script
sh axinstall
The display dialog will then guide you through the installation of
line printer daemon (LPD), file transfer protcol (FTP), or PROS
onto your UNIX system.
The UNIX configuration is now complete.
Note: The node address is based on the serial number of the Ethernet
adapter, but you can make the node address a locally administrated
address. To set the IP address, you can use the dynamic host
configuration protocol (DHCP), reverse address resolution protocol
(RARP), or bootstrap protocol (BOOTP) commands. For help, see the
Intermec Ethernet Adapter User's Manual (Part No. 068749).
(not visible)
.
15
Advertisement
Table of Contents
