Table of Contents
Advertisement
a. Extend the server from the rack.
b. Remove the server from the rack.
4.
Remove the access panel.
5.
Remove the primary PCI riser cage (Remove the primary PCI riser cage).
6.
If installed, remove any expansion boards installed in the riser board.
7.
Remove the riser board. Set aside for later use.
8.
If installed, remove the slot 2 bracket from the primary riser cage.
9.
If needed, install the riser board removed in step 7 on the rear drive riser cage bracket.
Hardware options installation
85
Advertisement
Table of Contents
