Table of Contents
Advertisement
Installation
It is dangerous to alter the specifications or attempt to
modify this product in any way.
Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Technical details
Voltage
Power consumption
Height:
Width:
Depth:
Weight:
Electrical connections
•
This appliance must be earthed.
•
Do not remove the screws from the earth tab
extending from the oven mains terminal block
230-240 Volts AC 50Hz
5.9-6.4kW
888mm
592mm
563mm (excluding handles and knobs)
55Kg
•
Before connecting the appliance, make sure that the
voltage of your electricity supply is the same as that
indicated on the rating plate. This is usually situated on
the front frame of the appliance and can be seen upon
opening either the main or top oven door.
Alternatively the rating plate may also be found on the
back or top of some models (where applicable).
•
Do not alter the electrical circuitry of this appliance.
Things to note
•
This appliance is designed to be fitted in cabinets of the
recommended dimensions as shown (Recommended
cabinet dimensions).
•
If your cabinet interior dimension is between 565-
570mm the oven may still be fitted. However, a minor
modification to the cabinet will be required to reduce
the aperture size down to 560-565 mm, to allow the
product to be securely screwed into the cabinet.
•
The dimensions given provide adequate air circulation
around the unit within the cabinet, ensuring compliance
with BS EN60-335.
•
Enquiries regarding the installation of the cooker point,
if required, should be made to your Regional Electricity
Company to ensure compliance with their regulations.
5
í
Advertisement
Table of Contents
