Arming While Driving - Clarion UNGO ProSecurity SR6000 Owner's Manual

➤
Press a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
➜

arming while driving

Your security system can be armed while driving the vehicle!
Simply press
is running. The siren will chirp once to indicate that the security
system is armed, and then once more to indicate that the ignition
is on. The system will not respond to any input except the door
triggers, and the starter kill relay (if installed) will not be acti-
vated. Once you have arrived at your destination, the system will
disarm when the ignition is turned off. The siren will chirp twice
and the LED will then stop flashing. The system can also be
disarmed at any time by pressing
The LCD 2-way remote will beep once (or vibrate), and the arm icon
(29) will be displayed on the LCD.
note: If the transceiver received a Warn Away
response page while armed, the first press of the unlock
button will clear the page alert. A second press will turn
the siren off, and a third press will disarm the system.
26
on the remote for two seconds while the vehicle
.
or triggered
®
© 2005 directed electronics, inc.