Locking/Arming - Clarion UNGO PRO SECURITY SYSTEM K20 Owner's Manual

u u s s i i n n g g y y o o u u r r s s y y s s t t e e m m
➜

locking/arming

Pressing for one second arms the system by activating the
starter kill (optional) and locking the doors (if connected). The
horn will honk (if connected and in audible mode) and the
parking lights will flash once to confirm arming of the system.
While the system is armed, the status LED will flash once per
second. The Failsafe
the vehicle's starter from cranking.
note: Manually locking the vehicle does not arm the sys-
tem; it will only lock the doors.
The system can also be programmed to arm the optional
Failsafe Starter Kill automatically (called Passive Mode). If the
®
system has been programmed for Passive Mode, the Failsafe
Starter Kill will automatically activate 30 seconds after the igni-
tion has been turned off. After the ignition has been turned off,
the status LED will flash rapidly to indicate that the system is in
Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive
Locking, the vehicle doors lock automatically at the same time that
the Failsafe ® Starter Kill is activated. If Passive Locking is
programmed on, care must be taken to prevent the keys from
being locked in the vehicle.
6
® Starter Kill (if installed) will also prevent
© 2006 directed electronics, inc.
®