I Key Customize Mode; I Guide Function - Icom IC-T2H Instruction Manual

I Key customize mode

The functions of the [SQL], [SC], [DUP], [H/L], [
T] and [ L] keys on the IC-T2H can be customized to suit
D
your operating needs.
➀
While pushing [#] + [0], turn power
on to enter key customize mode.
• "CUStom" appears.
➁
Push the key you wish to program.
• The key's currently programmed func-
tion appears and scrolls across the
display.
➂
Push the [Y]/[Z] keys to select the
function you wish to assign to the
key.
• See the chart on the following page
for assignable functions.
➃
Push the same key as in step ➁ for 1 sec. to assign the
function to the key.
• If this step is not performed, the key will retain its previous func-
tion.
➄
Push another key to be programmed, if desired; or, turn
power off, then on again to exit key customize mode.

I Guide function

POWER ON
AT
The guide function displays the functions of keys and
V], [ M], [
A B C
switches quickly and easily.
➀
Push [#] to activate the guide func-
tion.
• "GUIdE" appears in the display.
➁
Push and hold the key or switch
you want to know the function of.
• The key/switch name appears and its
assigned function scrolls across the
display.
➂
Release the key/switch pushed in the previous step to re-
turn to normal operation.
10
OTHER FUNCTIONS
MR
MR
31