Other Functions - Icom IC-T2H Instruction Manual

10

OTHER FUNCTIONS

ASSIGNABLE FUNCTIONS
NULL
Backlight
Power output
Scan start/stop
1
DTMF memory*
DTMF re-dial
Lock function
Beep tones
VFO/memory
Tone setting
Tone scan
Tuning step
Squelch level
2
WX channels*
3
ANI code*
Duplex setting
Memory write
Call channel
Shift
1
* The DTMF memory function can only be assigned to [SQL], [SC], [DUP] or [H/L]. *
3
* ANI code setting only appears when ANI operation is selected through cloning (p. 36).
32
DISPLAY READOUT
(LIGHT)
([H/L])
([SC])
(DTMF)
(RE-DIAL)
([ L])
D
(BEEP)
([ V])
A
([ T])
C
(T SCAN)
(TS)
([SQL])
(WX)
(ANI CODE)
([DUP])
([ M])
B
(CALL)
(SHIFT)
DESCRIPTION
No function.
Toggles display backlighting on/off.
Toggles high and low power output.
Starts and stops the scan function.
Selects a DTMF memory.
Redials the last-used DTMF code.
Toggles the lock function on/off.
Toggles confirmation beep tones on/off.
Toggles between VFO and memory modes.
Toggles tone squelch operation on/off.
Starts/stops tone scan.
Selects a tuning step for frequency selection.
Selects a squelch level.
Selects a weather channel.
Selects an ANI code.
Selects +duplex, –duplex or simplex operation.
Writes the selected frequency into a memory.
Selects the call channel.
Shifts the CPU's clock frequency.
2
Weather channels are only available in the USA version.