I Programming The Call Channel - Icom IC-T2H Instruction Manual

6
MEMORY/CALL PROGRAMMING
I Programming the
call channel
➀
Push [ f (CALL)] to select call
channel mode.
• "C" appears.
➁
f
Push [ (CALL)] for 1 sec. to enter
set mode.
➂
Push [t] one or more times until
"FR" appears.
➃
Push [6] digit keys to input the de-
sired frequency.
➄
If desired, push [t] again, then
push [Y]/[Z] to select another item
(e.g. tone setting) and condition.
➅
Repeat step ➄ until all desired in-
formation is programmed into the
call channel.
➆
f
Push [ (CALL)] to exit call channel set mode.
➇
Push [ M].
B
➈
Push [ f (CALL)].
➉
Push [ M] for 1 sec.
B
20
SET MODE
USING
DUP T