I Memory Editing; Memory/Call Programming - Icom IC-T2H Instruction Manual

I Memory editing

Memory (call) channel contents can be moved to VFO or to
another memory.
D Memory/call ➾ VFO
➀
Select the memory (call) channel to be transferred:
➥ Push [
V] ([ f (CALL)]) to select memory (call) mode.
A
➥ Push [Y]/[Z] to select the memory (call) channel.
➁
Push [ M] for 1 sec. to transfer the VFO contents to the
B
selected memory.
• VFO mode is selected.
D Memory/call ➾ memory/call
➀
Select the memory (call) channel to be transferred:
➥ Push [
f
V] ([ (CALL)]) to select memory (call) mode.
A
➥ Push [Y]/[Z] to select the memory (call) channel.
➁
Push [ M] momentarily.
B
• "VF" appears and flashes with "X".
➂
Push [Y]/[Z] to select the target memory.
➃
Push [ M] for 1 sec.
B
• VFO mode is selected and the contents are transferred to the tar-
get memory.

MEMORY/CALL PROGRAMMING

D Clearing a memory
➀
Push [ M] to enter memory transfer mode.
B
• "X" and a memory channel number flash.
➁
Push [Y]/[Z] to select the memory channel to be cleared.
• Memory channels PA, Pb and CH1 cannot be cleared.
➂
Push [ M] momentarily, then within
B
1 sec. push it again for 1 sec.
• The contents of the selected
memory are cleared.
➃
Push [ ] to return to regular operation.
6
MR
21