Table of Contents
Advertisement
Installing a printer memory card
Complete the following instructions to install a printer memory card.
Note: Memory cards designed for other printers may not work with your printer.
1
Remove the system board access panel. (See Accessing the printer system board.)
2
Push open the latches on both ends of the memory card connector.
3
Unpack the memory card.
Warning:
Printer memory cards are easily damaged by static electricity. Touch something metal such as the
printer frame before you touch a memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4
Align the notches on the bottom of the card with the notches on the connector.
5
Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on the end of the card.
Installing options
Installing a printer memory card
28
Advertisement
Table of Contents
