Ricoh InfoPrint 1585n User Manual page 102

Problem
Part or all of the page is
printed in black.
The job prints, but the top and
side margins are incorrect.
ABC ABC
DEF DEF
Ghost images appear.
Gray background prints.
Some of the print is cut off on
the sides, top, or bottom of
the media.
Print is skewed, or
inappropriately slanted.
Transparency print quality is
poor.
Troubleshooting
Action
Check the photoconductor kit to see if it is installed correctly.
• Make sure the Paper Size setting in the Paper menu is correct.
• Make sure the margins are set correctly in your software application.
• Make sure the Paper Type setting in the Paper menu is correct.
• Replace the photoconductor kit.
• The Toner Darkness setting may be too dark. Change the Toner Darkness setting in
the Quality menu.
• Adjust the Brightness to a darker setting.
• Adjust the Contrast to a darker setting.
• The photoconductor kit may be defective. Replace the photoconductor kit.
Move the guides in the tray to the proper positions for the size loaded.
• Use only transparencies recommended by the printer manufacturer.
• Make sure the Paper Type setting in the Paper menu is set to Transparency.
Solving print quality problems
102