Table of Contents
Advertisement
2
Squeeze the side guide tab, and slide the guide to outside of the tray.
3
Squeeze the front guide tab and slide the guide to the correct position for the size media you are loading.
4
Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the
edges on a level surface.
5
Load print media in the tray with the print side up.
For information about loading Letter or A4 size media in the short-edge feed position, see Loading Letter or A4
size print media in the short-edge feed orientation on page 58.
Note: Make sure the print media is below the max fill line on the rear guide. Overloading may cause jams.
Printing
Loading standard or optional 500-sheet trays
50
Advertisement
Table of Contents
