Cisco NME-16ES-1G Features Manual page 74

Troubleshooting the Cisco EtherSwitch Service Module Software
Command or Action
Step 6
rename
Example:
Switch: rename flash:config.text
flash:config.text.old
Step 7
boot [-x] [-v] [device:][imagename]
Example:
Switch: boot
Step 8
copy flash:
Example:
Switch: copy flash:config.text
system:running-config
Step 9
configure terminal
Example:
Switch# configure terminal
Step 10
enable secret password
Example:
Switch(config): enable secret 5
$1$LiBw$0Xc1wyT.PXPkuhFwqyhVi0
Step 11
exit
Example:
Switch(config): exit
Cisco IOS Release 12.2(25)SEC
74
Cisco EtherSwitch Service Modules Feature Guide
Purpose
Renames the configuration file to config.text.old.
• Before continuing to the next command, power up
any connected stack members and wait until they
have completely initialized.
Use the boot command to boot up an external process.
Copies the configuration file into memory.
Enters global configuration mode.
Sets the password.
• The secret password can be from 1 to 25
alphanumeric characters.
• It can start with a number.
• It is case sensitive.
• It allows spaces but ignores leading spaces.
Returns you to privileged EXEC mode.