Cisco NME-16ES-1G Features Manual page 38

How to Configure the Cisco EtherSwitch Service Module
Command or Action
Step 13
enable
Example:
Switch> enable
Step 14
show ip interface brief
Example:
Switch# show ip interface brief
Step 15
control+shift+6 x
Example:
Switch# control+shift+6 x
Step 16
disconnect
Example:
Router# disconnect
Step 17
show power inline
Example:
Router# show power inline
Cisco IOS Release 12.2(25)SEC
38
Cisco EtherSwitch Service Modules Feature Guide
Purpose
Enters privileged EXEC mode on the Cisco EtherSwitch
service module.
Displays brief version of the Cisco EtherSwitch service
module configuration information.
Returns you to the router console while keeping the
console session to the switch intact.
Terminates the console session to the Cisco EtherSwitch
service module.
Displays the PoE statistics maintained on the Cisco
EtherSwitch service module.
PoE statistics are updated dynamically.
Note
Output of the
show service-module status
must be in steady state for inline power to function.
command