Cisco NME-16ES-1G Features Manual page 71

Etherswitch service modules
Hide thumbs Also See for NME-16ES-1G:
Table of Contents

Advertisement

Cisco EtherSwitch Service Modules Feature Guide
You are prompted for the max retry count. Accept the default:
Max Retry Count [10]:
You are prompted to confirm the transfer to the Cisco EtherSwitch service module:
Xmodem send on slot 2 interface 0. Please be sure there is enough space on receiving side.
Continue? [confirm]
The following appears when the image is downloaded to the service module:
Ready to send file...........
Loading anyname/loader_bs.img from 223.255.254.254 (via
GigabitEthernet0/0):!C!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!.!!!!!!.!!!!!!!!!!!!!!!!!!!!!
[OK - 262144 bytes]
!
Verifying checksum...
262144 bytes copied in 22.368 secs (11720 bytes/sec)
Sample Output for the service-module session Command on the Cisco EtherSwitch Service Module
The following example shows what appears when you enter the service-module session command:
Router# service-module gigabitethernet1/0 session
Trying 41.0.0.1, 2130 ... Open
Switch:
Sample Output for the dir flash: Command on the Cisco EtherSwitch Service Module
The following example shows what appears when you enter the dir flash: command:
rommon> dir flash:
Directory of flash:/
4
-rwx
6
-rwx
7
-rwx
8
-rwx
32514048 bytes total (19113472 bytes free)
Sample Output for the service-module password-reset Command on the Cisco EtherSwitch Service Module
The following example shows what appears when you enter the service-module password-reset
command:
Router# service-module gigabitethernet2/0 password-reset
Do you want to proceed with password reset process?[confirm]
Starting password reset process...
Wait for 50 secs for password reset process to complete
Router#
[Resuming connection 1 to 100.0.2.1 ... ]
Password reset process is complete...
Base ethernet MAC Address: 00:00:00:20:60:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem.
OK (0x4F76)
2056
Mar 1 1993 00:01:29 +00:00
6636204
Mar 1 1993 00:19:19 +00:00
1709
Jan 12 2005 00:56:39 +00:00
5
Jan 12 2005 00:56:39 +00:00
The following commands will initialize
Troubleshooting the Cisco EtherSwitch Service Module Software
vlan.dat
c3750-i5-mz.122204
config.text
private-config.text
Cisco IOS Release 12.2(25)SEC
71

Advertisement

Table of Contents
loading

Table of Contents