Anti-tip bracket
overhead
cabinetry
assembly kit
Anti-tip bracket (1)
Masonry plug (4)
#10x40
cross-head screw (4)
Tools
Cross-head screwdriver
Floor
PROFILE VIEW
Powered drill
Pencil
36
INSTALL ANTI-TIP BRACKET
back wall
A
Locating the attachment position of anti-tip bracket
stud
1 Measure the height (A) of the attachment location from
the floor to the alcove return and mark a horizontal line (B)
at the back wall.
z
B
z
2 Place the bracket to the backwall. Align the undersurface of
197mm
the bracket along the marked line.
bracket
3 Mark screw hole locations, and drill screw holes with
powered drill.
z
The height (A) must not exceed 2138mm to ensure the
appliance does not tip over during installation.
Ensure there is a stud behind the wall.
For solid wall installation, drill holes suitable to the size of
the masonry plugs.