Table of Contents
Advertisement
1
Position the rails on the sides of the cabinet. Fix with the screws provided, then extract
them completely.
If the coffee maker is installed over a warmer drawer, use the top surface of this as
●
a reference to position the rails.
In this case, there will be no surface to rest the rails on.
●
3
Position the appliance on the rails, making sure the pins are correctly inserted
in the housings, then fix it with the screws supplied. If the height of the appliance
requires adjusting, use the spacer disks provided.
7
INSTALLATION INSTRUCTIONS
2
Fix the power cable with the clip. The power cable must be long enough to allow
the appliance to be extracted from the cabinet to fill the coffee bean container.
The appliance must be earthed in compliance with legislation.
●
Electrical connections must be performed by a qualified electrician following
●
the instructions.
4
If necessary, correct alignment of the appliance by positioning the spacers
supplied under or at the sides of the support.
approx. 13 3/4" (350mm)
| 9
COFFEE MAKER INSTALLATION GUIDE
Advertisement
Table of Contents
