Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
IMPORTANT!
All installation or maintenance operations must be performed with the appliance disconnected
●
from the mains electricity supply.
Kitchen furniture in direct contact with the appliance must be heat resistant 149°F min (65°C min).
●
To guarantee correct ventilation, leave a gap at the bottom of the cabinet
●
(see measurements below).
M
k
SIDE
n
CABINETRY DIMENSIONS
Minimum inside width of cavity
I
Overall width of cabinetry
J
Minimum inside height of cavity
K
Overall height of cabinetry
L
Minimum inside depth of cavity
M
Ventilation Air Gap
n
6A
CABINETRY DIMENSIONS (18 1/8" (460mm) HIGH CAVITY)
L
J
I
Electrical supply
TOP
EB24 MODELS
inches (mm)
22 1/16" (560)
23 5/8" (600)
17 3/4" (450)
18 1/8" (460)
21 7/16" (545)
2" (50)
5/8–13/16"
PROUD INSTALL
(16–20mm)
13/16"
(20mm)
5/8–13/16"
FLUSH INSTALL
(16–20mm)
13/16"
(20mm)
min 1/16" (2mm)
COFFEE MAKER INSTALLATION GUIDE
| 7