Marantz SR5011 Service Manual page 161

Error DPMS Update Error
Details of Error code
Code Display
DPMS connection failure
24
Error**24
notification after SBL.
25 Failed to transit to SBL Mode.
Error**25
Error in Firmware Download
26
Error**26
(Time Out).
Failed to write to EEPROM
27
Error**27
after SBL Mode.
DPMS login incorrect notifica-
36
Error**36
tion.
DPMS connection failure
38
Error**38
notification.
DPMS connection Time Out
39
Error**39
Error.
Error(NG) notification received
3A while requesting Firmware
Error**3A
Download.
Error(Connect failure) notifica-
3C tion received while request-
Error**3C
ing Firmware Download.
After SBL Mode IP Address
3D
Error**3D
acquisition failure (AutoIP).
After SBL Mode IP Address
3E
Error**3E
acquisition failure (Time Out).
3F Failed to transit to SBL Mode.
Error**3F
DPMS login incorrect notifica-
50
Error**50
tion.
DPMS connection failure
52
Error**52
notification.
Remedies
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
161
Error DPMS Update Error
Details of Error code
Code Display
Error notification received
54 while requesting the Firm-
Error**54
ware Info.
Time Out while obtaining
55
Error**55
Firmware information.
Error(NG) notification received
56 while requesting Firmware
Error**56
Download.
Error(Connect failure) notifica-
58 tion received while request-
Error**58
ing Firmware Download.
Invalid Device ID in response
5A or no response from Sub for
Error**5A
the "C" command.
NACK received in response or
5B no response from Sub for the
Error**5B
"L" command.
No Update Packet received
5C
Error**5C
from CY920 (Time Out).
Abnormal data in Update
5D Packet received from CY920
Error**5D
(CRC Error).
Abnormal data in Update
5E Packet received from CY920
Error**5E
(Packet No Error).
Setup failure of the XModem
5F
Error**5F
transfer method.
NACK received in response or
60 no response from Sub for the
Error**60
"P" command.
Mismatched Check Sum in
61 response or no response from
Error**61
Sub for the "I" command.
Remedies
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.