Marantz SR5011 Service Manual page 125

7. Clearing the Operation Info
7.1. Actions
• Displays the accumulated operating time of the unit, the number of times the power was switched on,
and the number of occurrences of each protection.
7.2. Operations
Remove all input/output terminals and the AC plug.
Connect the AC plug again and place the product in standby mode.
While holding down buttons "DIMMER" and "INTERNET RADIO" simultaneously, press the power but-
ton to turn on the power.
L1
PRODUCT
L2
MODE
L3
When "PRODUCT MODE" appears on the display, release the button and press the "power" button and
"ZONE2 ON/OFF" to place the product in standby mode.
125