Marantz SR5011 Service Manual page 124

4. Protection Pass Mode
4.1. Actions
• This mode allows the power to be turned on without activating protections.
• This mode functions in the same way as normal power-on, except that protections are not activated.
4.2. Operations
While holding down buttons "DIMMER", "STATUS" and "SOUND MODE" simultaneously, press the
power button to turn on the power.
The device returns to the normal display message after the following is displayed.
L1
Protect
L2
Pass
L3
This is displayed for 5 seconds before returning to the normal display.
5. CY920 Reboot Mode
5.1. Actions
• The CY920 is restarted after CY920 hang up.
• The CY920 can be restarted even in the network standby setting.
("Setup menu" – "Network" – "IP Control" – "Always On")
5.2. Operations
(1) Turn the "MAIN ZONE" button On and set the input source to NETWORK.
(2) While the power is On, hold down buttons "TUNER PRESET CH +" and "STATUS" for at least 3 sec-
onds.
Display during CY920 reboot
L1
Network
L2
Restart
L3
(4) Returns to the normal display.
NOTE :
• After rebooting CY920, the same operation is not accepted for 1 minute.
• Reception is prohibited during update, save and load.
6. CY920 Initialization Mode
6.1. Actions
The following items are initialized.
(1) Favorites
(2) Quick Select
(3) Presets
(4) Internet Radio Recently Played
(5) Flickr contacts
(6) User ID
(7) Resume Playback station
6.2. Operations
While the power is on, hold down buttons "TUNER PRESET CH -" and "DIMMER" for at least 3 sec-
onds.
Initializing Display
L1
Initial
L2
Wait
L3
L2
Wait.
L2
Wait..
L2
Wait...
Complete Display
L1
Complete
L2
L3
This is displayed for 5 seconds before returning to the normal display.
Failed Display
L1
Failed
L2
L3
124