Marantz SR5011 Service Manual page 114

1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
While holding down buttons "DIMMER" and "STATUS" simultaneously, press the power button to turn
on the power.
then press the "STATUS" button to display the information in section 1.3 on the display.
b The version list is also displayed on GUI while the version is displayed on the display.
1.3. Display Order
Error information (See "1.4. Error display") → q Model destination information → w Firmware Package
→ e Main µ-com → r DSP ROM → t Audio PLD → y GUI SFLASH
→ u Ethernet 1st Boot Loader, Hardware ID → i Ethernet 2nd Boot Loader, Rhapsody Flag
→ o Ethernet IMAGE → Q0 Network MAC ADDRESS information → Q1 Bluetooth MAC Address informa-
tion
q Model destination information :
L1
SR5011 \
L2
SN-****
L3
******
\ ： Region (U, N, K, F)
w Firmware Package :
L1
PACKAGE
L2
L3
****
e Main µ-com :
L1
MAIN *
L2
%%%%####
L3
BL-**.**
% ： Main version, # ： Sub version
r DSP ROM :
L1
DSP
L2
L3
**.**
t Audio PLD :
L1
A.PLD
L2
L3
**.**
y GUI SFLASH :
L1
GUI
L2
XXYZ****
L3
X ： Model code, Y ： Model, Z ： Region
u Ethernet 1st Boot Loader, Hardware ID :
L1
NET FBL
L2
******
L3
-**
i Ethernet 2nd Boot Loader, Rhapsody Flag :
L1
NET SBL
L2
********
L3
*****-**
o Ethernet IMAGE :
L1
NET IMG
L2
********
L3
*****
Q0 Network MAC ADDRESS information：
L1
NET MAC
L2
******
L3
-******
Q1 Bluetooth MAC ADDRESS information：
L1
BT MAC
L2
******
L3
-******
114