Table of Contents
Advertisement
Troubleshooting
See the table at the beginning of the Settings section
on page 45 for temperature and pressure alarm settings.
NOTE: See non-Graco manuals for non-Graco compo-
nent troubleshooting.
Alarm Status Screen
RA
RB
F
. 22
IG
Key:
RA Alarm Silence
RB Alarm Reset
Alarm conditions are indicated on the Alarm Status screen which can be selected from the menu bar along the bot-
tom of all screens. A new alarm condition will cause an alarm to sound and the new alarm message will immediately
appear in the alarm display section. Pressing the "Alarm Silence" button will silence the alarm beeper and pressing
"Alarm Reset" will reset the alarm if the fault is absent. Alarms must be silenced, cleared, and reset prior to restarting
any motors stopped by the alarm.
313813A
RC Reset Alarm Data
Troubleshooting
RC
57
Advertisement
Table of Contents
Troubleshooting
