Graco Aerobotix RC50 Instructions Manual page 18

Table of Contents

Operation

Last Shot Data

The control system records the actual shot time after the

shot has occurred for each dispense gun. The control

system also captures the flow rates, ratios, tempera-

tures, and pressures for the last shot. The flow rate is

captured shortly after the shot begins. A running count

of the number of shots taken is tracked and can be

returned to zero by pressing the reset button.

When logged in as a default user, only the Main Menu

screen is accessible. The user must log in as an "Opera-

tor" (Password 20) to gain access to all screens except

for the Scaling screen. To gain access to the Scaling

screen, the user must log in as a "Maintenance" user

(Password 10). The "Factory" user name is reserved for

Graco factory personnel to set initial parameters on the

machine.

Setting the System Clock

To adjust the system clock, first turn on main power and

then control power. When the HMI finishes loading the

Main Menu screen, select "Set System Clock." Then

select each date and time button in the "PanelView

Clock/Calendar" screen to enter the current information.

There will be a short delay between hitting the return

arrow and the new information being displayed on the

PanelView screen.

Enter the hour item as the 24-hour time. For exam-

ple, 1 PM is entered as "13". The machine will auto-

matically convert the time in the upper left corner of

the screen to display the appropriate AM/PM time.

313813A

Table of Contents

Troubleshooting