Graco Aerobotix RC50 Instructions Manual page 20

Operation
Manual, Automatic Modes
With control power on, either of these modes can be
selected. When a certain mode is selected, the related
button will turn green.
System Status Indicators
The status of all system conditions is shown. This
includes various temperatures and pressures through-
out the system. The relative position of these sensors is
shown schematically on the screen. Other system indi-
cators include motor status, tank level, temperature con-
trol, and auto-fill status.
MixHead Status Indicators
The Status Screen includes several indicators that show
machine operation status.
MixHead Pour Ready Indicator
• shows green when all requirements are made for
beginning a pour besides pressing the start button.
MixHead In Cycle Indicator
• shows green when a pour has been started and the
controls are in the stages of a pouring operation
MixHead Pouring Indicator
• Shows green when the control system has com-
manded a pour. This occurs regardless of whether
the MixHead is turned on or off.
Manual Control
Manual Control allows the operator to dispense material
without a remote (robot) signal. See Manual Control
Screen on page 21 for more information.
20 313813A