Procédure D'extinction - Shutdown Procedure; Fonctionnement En Mode Automatique Depuis Générateur - Generator Automatic Mode Opertation - Generac Power Systems V20 Owner's Manual

8,5m 4x300w led tower light
Hide thumbs Also See for V20:
Table of Contents

Advertisement

V20 8,5m 4x300W LED
14.10.2.2 PROCÉDURE D'EXTINCTION – SHUTDOWN PROCEDURE
Pour éteindre les lampes, il faut appuyer de
nouveau sur les boutons On/Off (48)
Les lampes ne sont pas éteintes en même
temps mais avec un temps d'attente de l'une à
l'autre.
Le LED d'état (49) clignote lors du temps
d'attente et s'éteint lorsque ce temps est
écoulé et que la lampe est éteinte.
Pour éteindre le moteur, il faut appuyer une
fois sur le bouton Start/Stop (46)
14.10.3 FONCTIONNEMENT EN MODE AUTOMATIQUE DEPUIS GÉNÉRATEUR –
GENERATOR AUTOMATIC MODE OPERTATION
Placer
le
sélecteur
G
« GENERATOR »" (
Placer les interrupteurs magnétothermiques et
différentiels situés sur le panneau frontal en
position « On » (I).
En appuyant sur le bouton (47) en Mode
Automatique, l'icône
les icônes activées :
pour Timer
Il est possible d'activer une ou plusieurs
options, selon la disponibilité de chacune
Pour une description complète des fonctions
Crépusculaire et Timer de la logique, se
reporter au MANUEL D'UTILISATION GTL01
Controller.
KUBOTA ENGINE
...
.
.
(24)
en
position
).
est remplacée par
pour Crépusculaire,
To switch off the lamps it is needed to press
the lamp On/Off buttons (48)
The
lamps
shall
simultaneously, but with a delay between one
and the other.
The Status Leds (49) blinks during the delay,
they turn off when the delay is expired and
the lamps turn off effectively.
To stop the engine, it is needed to press the
Start/Stop button (46)
Turn the select (24) to "GENERATOR" (
Switch "ON" (I) the RCD and all circuit
breakers on the control panel.
Press the button (47) in Automatic Mode, the
icon
is substituted by the icons enabled:
for Light Sensor,
It is possible to enable one or more options,
depending on which are available.
For complete description of Light Sensor and
Timer the logic, capability refer to the
OWNER'S MANUAL GTL01 Controller.
52
...
.
not
switched
off
once.
G
).
for Timer.
TL193-01-00-00
27-03-2017
Française -English

Advertisement

Table of Contents
loading

Table of Contents