Table of Contents
Advertisement
5.6.
Searching for Zones (If Applicable)
"Zoning - - Searching" will appear on the screen to determine if any zones are
present. The screen will show Zone 1, Zone 2, etc. and indicate all zones having
either a Remote Room Sensor, or smart sensors associated with them. If the system
contains smart sensors, they must be assigned a zone number before continuing.
See the Smart Sensor Installation Instructions on how to assign Smart Sensors to
their respective zones. After each zone has been identified, touch NEXT.
5.7.
Filter Type Selection
The installer will next be prompted to select the air filter type installed with the
Evolution System. After the selection is made, touch NEXT.
Air Filter: 1- - in. to 4- - in. media filter
S
EAC: high voltage electronic air cleaner
S
Air Purifier: Evolution Series or Preferredt Series Air Purifier
S
5.8.
Humidifier Installation
Next, the installer will be prompted to select whether a humidifier is installed in the
system. Select YES or NO, then touch NEXT.
22
A12185
Advertisement
Table of Contents
