Searching Sam Module (If Applicable) - Bryant Evolution Connex Control Installation Instructions Manual

5.5. Searching for SAM Module (If Applicable)
"Searching for SAM Module" will appear on the screen to determine if a System
Access Module, used for home automation only, is connected to the system.
The SYSTXBBSAM01 is not compatible with this control. The compatible modules
are SYSTXBBRCT01 and SYSTXBBRWF01. The SAM is used for home
automation purposes and is NOT used to connect the system control to the Internet.
The Evolution Connex control must have at least Version 8 software or newer to be
compatible with the SAM.
NOTE: For more information regarding the SAM Module, reference the latest
version of the application specification entitled "SAM Remote Access Application
Specification, ASCII Protocol Information", available on HVACpartners.com, or
the System Access Module Installation Instructions.
A13117
21