Table of Contents
Advertisement
GloWinG eMBers
1. Apply a single layer of small "dime-sized" pieces of rock wool (glowing embers) in the shaded areas shown below.
note: Pieces of glowing embers should be fluffed up prior to placement onto the burner.
note: Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application
of excess loose material (glowing embers) may adversely affect performance of the appliance.
WarninG
all previously applied loose material must be removed prior to reapplication.
top View - ember placement shown in shaded area
Figure 51
33740-17-0120
Page 31
Advertisement
Table of Contents
