Glowing Embers - Empire Comfort Systems MILLIVOLT DVCP3630-1 Installation Instructions And Owner's Manual

Install embers after installing the false floor of the fireplace, and
before the logs. Refer to the instruction manual supplied with
your Log Set or Mixed Log and Stones kit. Apply a single layer of
small "dime-sized" pieces of rock wool (glowing embers) in the
shaded areas shown below.
NOTICE:
• Pieces of glowing embers should be fluffed up prior to
placement onto the burner.
• Replacement of loose material (glowing embers) must be
purchased from an Empire Comfort Systems Dealer.
• Application of excess loose material (glowing embers) may
adversely affect performance of the fireplace. A single layer
of embers is to be used when applying Platinum Bright
Embers (in combination with production embers) to the
burner.
All previously applied loose material must be removed
prior to reapplication.
36092-5-0318

GLOWING EMBERS

WARNING
TOP View - Ember Placement Shown in Shaded Area
Figure 65
Page 37