Code 39 Start/Stop Characters; Code 39 Check Character - Hand Held Products 4800p User Manual

Code 39
< Default All Code 39 Settings >
Code 39
* On
Off

Code 39 Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters. Default = Don't
Transmit.
Transmit
* Don't Transmit

Code 39 Check Character

No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.
6 - 6 4800p 2D Imager User's Guide