Telepen Output; Telepen Message Length - Hand Held Products 4800p User Manual

Telepen
<Default All Telepen Settings>
Telepen
On
* Off

Telepen Output

Using AIM Telepen Output, the imager reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the imager reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2). Default = AIM Telepen Output.
* AIM Telepen Output
Original Telepen Output

Telepen Message Length

Scan the bar codes below to change the message length. Refer to Message
Length Description (page 6-2) for additional information. Minimum and
Maximum lengths = 1-60. Minimum Default = 1, Maximum Default = 60.
Minimum Message Length
Maximum Message Length
4800p 2D Imager User's Guide 6 - 19