QR Code
Note: QR Code can only be read by a 2D imager.
QR Code
This selection applies to both QR Code and Micro QR Code.
* On
Note: The default applies to firmware with a base number of 31205480. Refer
to the
Show Software Revision
determining the firmware revision in your unit
QR Code Message Length
Scan the bar codes below to change the message length. Refer to
Length Description
Maximum lengths = 1-3500. Minimum Default = 1, Maximum Default = 3500.
Minimum Message Length
4800p 2D Imager User's Guide
< Default All QR Code Settings >
(page 6-2) for additional information. Minimum and
on page 10-2 for information on
Maximum Message Length
Off
Message
6 - 47