Decode Search Mode; Output Sequence Overview - Hand Held Products 4800p User Manual

Decode Search Mode

There are three selectable decode (scanning) modes:
Full Omnidirectional - Searches for bar code features beginning at the center
of an image, and searches to the image's limits. This mode reads all
symbologies (including OCR), in any orientation. The Full Omnidirectional
search is very thorough which may slow performance time.
Note: This search mode is the default setting.
*Full Omnidirectional
Quick Omnidirectional - This is an abbreviated search for bar code features
around the center region of an image. This mode quickly reads all symbologies
in any orientation. The Quick Omnidirectional mode may miss some off-center
symbols, as well as larger Data Matrix and QR Code symbols.
Quick Omnidirectional
Advanced Linear Decoding - Performs quick horizontal linear scans in a center
band of the image. This mode is not omnidirectional, but does quickly read linear
and stacked bar codes. Advanced Linear Decoding cannot read 2D, OCR, or
Postal symbols.
Advanced Linear Decoding

Output Sequence Overview

Require Output Sequence
When turned off, the bar code data will be output to the host as the Imager
decodes it. When turned on, all output data must conform to an edited sequence
or the imager will not transmit the output data to the host device.
Note: This selection is unavailable when Print Weight (page 3-11) is enabled.
4800p 2D Imager User's Guide 3 - 7