Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the imager emits
on a good read. Default = Medium.
Low (1600 Hz)
* Medium (3250 Hz)
High (4200 Hz)
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the imager emits on a
good read. Default = Normal.
* Normal Beep
Short Beep
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. To change
the number of beeps, scan the bar code below and then scan a digit (1-9) bar
code and the Save bar code on the
Programming Chart
inside the back cover of
this manual. Default = One.
Number of Pulses
3 - 2
4800p 2D Imager User's Guide